Journals →  Chernye Metally →  2024 →  #4

Chernye Metally



Steelmaking and Continuous casting
ArticleName Low-cost technological methods aimed at improving steel production technology in order to reduce costs and improve the quality of metal products
ArticleAuthor I. V. Chumanov
ArticleAuthorData

South Ural State University, Chelyabinsk, Russia

I. V. Chumanov, Dr. Eng., Prof., Head of the Dept. of Engineering and Materials Production Technology, e-mail: chumanoviv@susu.ru

ArticleName Numerical study of the thermomechanical state of the shell of a continuously cast billet at the early stage of solidification in a mold
ArticleAuthors A. V. Ivanov, V. V. Stulov, O. M. Shafiev
ArticleAuthorsData

Bauman Moscow State Technical University, Moscow, Russia
A. V. Ivanov
, Associate Prof., Dept. of Equipment and Rolling Technology, e-mail: avivanov@bmstu.ru
V. V. Stulov, Dr. Eng., Prof., Dept. of Equipment and Rolling Technology, e-mail: stu@bmstu.ru
O. M. Shafiev, Postgraduate Student, Dept. of Equipment and Rolling Technology, e-mail: oleg.shafiev2016@gmail.com

Foundry production
ArticleName Material for manufacture of disposable lost patterns in production of cast iron castings
ArticleAuthors I. O. Leushin, L. I. Leushina, O. S. Koshelev, P. A. Gorokhov
ArticleAuthorsData

Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia

I. O. Leushin, Dr. Eng., Prof., Head of the Dept. of Metallurgical Technologies and Equipment, e-mail: igoleu@yandex.ru
L. I. Leushina, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: kafmto@mail.ru
O. S. Koshelev, Dr. Eng., Prof., Dept. of Mechanical Engineering Technological Complexes, e-mail: kos7shef3@yandex.ru
P. A. Gorokhov, Postgraduate Student, Dept. of Metallurgical Technologies and Equipment, e-mail: pavel_goroxov@mail.ru

Rolling and other Metal Forming Processes
ArticleName The practice of applying binary logistic regression to reduce the number of negative technological events in rolling production
ArticleAuthor I. I. Shopin
ArticleAuthorData

Lipetsk State Technical University, Lipetsk, Russia

I. I. Shopin, Cand. Eng., Dept. of Metal Processing, e-mail: ShopinII@yandex.ru

ArticleName Features of formation of fine-dispersed structure of coil rolled bearing steel
ArticleAuthors S. A. Savchenko, I. A. Kovaleva, I. V. Astapenko, A. B. Sychkov
ArticleAuthorsData

Belarusian Steel Works — the management company of the BMC holding, Zhlobin, Belarus

S. A. Savchenko, Leading Engineer-Technologist of the Technical Management of the Rolling Dept., e-mail: gnp.tu@bmz.gomel.by
I. A. Kovaleva, Head of the Research Center`s Research Lab. – the Branch Lab. of Metallurgical and Steel Wire Production Technologies of the Technical Dept., e-mail: nl.icm@bmz.gomel.by

 

Sukhoi State Technical University of Gomel, Gomel, Belarus
I. V. Astapenko, Dr. Agr., Associate Prof., Dept. of Metallurgy and Materials Processing Technology, e-mail: astapenko@tut.by

 

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia
A. B. Sychkov, Dr. Eng., Prof., Dept. of Foundry Processes and Materials Science3, e-mail: absychkov@mail.ru

Production of pipes and Metal science
ArticleName Structure and properties of hot-rolled seamless pipes made of carbon and low-alloy steels after heat treatment
ArticleAuthors I. V. Smarygina, A. S. Aleshchenko, A. E. Antoshchenkov, L. M. Kaputkina
ArticleAuthorsData

National University of Science and Technology MISIS, Moscow, Russia

I. V. Smarygina, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: smarygina.iv@misis.ru
A. S. Aleshchenko, Cand. Eng., Associate Prof., Head of the Dept. of Metal Forming, e-mail: aleschenko.as@misis.ru

L. M. Kaputkina, Dr. Phys.-Math., Prof., e-mail: kaputkina@mail.ru

 

Trading House “Siberian Industrial Group”, Moscow, Russia

A. E. Antoshchenkov, Cand. Eng., Technical Director, e-mail: a.antoshchenkov@td-spg.ru

ArticleName Determination of equivalent stresses of pipes made of 12Kh1МF steel using FEM method, taking into account changes in geometry and scaling during operation
ArticleAuthors S. V. Voronin, K. K. Chaplygin, V. S. Danilushkin
ArticleAuthorsData

Samara National Research University named after Academician S. P. Korolev, Samara, Russia

S. V. Voronin, Cand. Eng., Associate Prof., Dept. of Metal Technology and Aviation Materials Science, e-mail: voronin.sv@ssau.ru
K. K. Chaplygin, Postgraduate Student, Dept. of Metal Technology and Aviation Materials Science, e-mail: chapkostya96@mail.ru
V. S. Danilushkin, Postgraduate Student, Dept. of Metal Technology and Aviation Materials Science, e-mail: vladislavdan@bk.ru

ArticleName Modification of 110G13L steel with rare earth metal oxide powders
ArticleAuthors G. Kh. Sharipzyanova, Zh. V. Eremeeva, D. V. Valuev, A. S. Bovkun
ArticleAuthorsData

Moscow Polytechnic University, Moscow, Russia

G. Kh. Sharipzyanova, Cand. Eng., Associate Prof., Vice-Rector for Education, e-mail: guzel@mtw.ru

 

Moscow Polytechnic University, Moscow, Russia1 ; National University of Science and Technology MISIS, Moscow, Russia2
Zh. V. Eremeeva, Dr. Eng., Prof., Dept. of Metallurgy1, Dept. of Powder Metallurgy and Functional Coatings2, e-mail: eremeeva-shanna@yandex.ru

 

Yurga Technological Institute, branch of the National Research Tomsk Polytechnic University, Yurga, Russia
D. V. Valuev, Cand. Eng., Associate Prof., e-mail: valuev@tpu.ru

 

Irkutsk National Research Technical University, Irkutsk, Russia
A. S. Bovkun, Cand. Eng., Associate Prof., e-mail: Bovas87@yandex.ru

Ecology and Recycling
ArticleName Technology for manufacturing products from high-speed steel chips
ArticleAuthors S. I. Bogodukhov, E. S. Kozik, E. V. Svidenko, Yu. V. Semagina
ArticleAuthorsData

Orenburg State University, Orenburg, Russia

S. I. Bogodukhov, Dr. Eng., Prof., Dept. of Materials Science and Technology of Materials, e-mail: ogu@mailgate.ru
E. S. Kozik, Cand. Eng., Associate Prof., Dept. of Descriptive Geometry, Engineering and Computer Graphics, e-mail: ele57670823@yandex.ru
E. V. Svidenko, Cand. Eng., Associate Prof., Dept. of Materials Science and Technology of Materials, e-mail: tzvetkova.katia2016@yandex.ru
Yu. V. Semagina, Cand. Eng., Associate Prof., Dept. of Descriptive Geometry, Engineering and Computer Graphics, e-mail: lugowskaja@yandex.ru

ArticleName Reducing waste from hardware production when removing scale in the context of the circular economy development
ArticleAuthors D. M. Tavrikov, N. N. Yashalova
ArticleAuthorsData

Cherepovets State University, Cherepovets, Russia

D. M. Tavrikov, Postgraduate Student, Dept. of Economics and Management, e-mail: dmtavrikov@chsu.ru
N. N. Yashalova, Dr. Econ., Associate Prof., Head of the Dept. of Economics and Management, e-mail: natalij2005@mail.ru

Economics and Finances
ArticleName Improvement of management of business processes of metallurgical enterprises based on transformation of analysis
ArticleAuthors V. S. Vasiltsov, M. S. Krasovsky, V. M. Vasiltsova, A. V. Sushinskaya
ArticleAuthorsData

Cherepovets State University, Cherepovets, Russia

V. S. Vasiltsov, Dr. Econ., Prof., Dept. of Economics and Management (E&M), Business School, e-mail: vsvasiltcov@chsu.ru
M. S. Krasovsky, Postgraduate Student, Dept. of Economics and Management (E&M), Business School, e-mail: Krasovskii.MS@gmail.com
V. M. Vasiltsova, Dr. Econ., Prof., Dept. of Economics and Management (E&M), Business School, e-mail: 3296@rambler.ru

 

Cherepovets State University, Cherepovets, Russia1 ; Severstal Management, Cherepovets, Russia2
A. V. Sushinskaya, Master’s Student, Dept. of Economics and Management (E&M), Business School1, Manager2, e-mail: avsoloveva2@chsu.ru

Journals →  Chernye Metally →  2024 →  #4